Contents
Whichever appliance or machine you buy they are destined to stop functioning and become a piece of junk after a point of time. At most what you can do is to keep the servicing and proper maintenance done from time to time so that its shelf life can be increased but even then, it will expire someday. Whatever exists on earth has to die one day!
Similarly, the top-rated water dispenser that you bought will surely stop functioning one day. You must be following the usage guidelines told to you by the manufacturer at the time of purchase including the regular cleaning, maintenance, changing of the filter, etc but what if it has just been a few days and your dispenser stops functioning? How would you fix it? This article will explain to you, how you can fix a non-functioning water dispenser of yours.
Water dispensers do not generally get dysfunctional but they have some parts that need to be installed well and properly to get them working. If the parts have not been installed the way they should be, the machine would not give you optimum results. In fact, the parts not installed properly can lead to water leakage and you will end up wasting water instead of saving it. Also, though being reliable and convenient, these machines are definitely susceptible to getting damaged just like any other equipment. You must have noticed that however your workplace has got the best water dispenser brand installed, it begins to leak after some time. Therefore, it is mandatory for you to understand how you can fix a leaking water dispenser because after all, it is not only your workplace where the machine is installed but your home also and the one at your home can too begin to leak someday. Now, let us understand how to fix a leaking water dispenser on our own without the help of any professional.
Why Can a Water Dispenser Begin to Leak?
One of the most common reasons for the water dispenser malfunction is water leakage. Why is it happening? The answer is, even the best kitchen water dispenser you have, has not been installed properly and there are a few parts that are allowing the water to escape. So, first of all, make sure that all the parts of the water dispenser have been tightened well and there is no room for the water to escape through them. The very first thing that you should do as soon as you notice that there is something wrong with your water dispenser, is to diagnose the problem or the cause for its malfunctioning. Do not jump on to fixing it immediately. This is because if you accidentally misinterpret the situation or the cause, you can end up making the situation even worse. Just as a doctor does not prescribe any medicines for the illness until all required tests have been done, you also are not supposed to jump on fixing your water dispenser until the main cause of the problem is known.
Remember, the manual which the manufacturer gave to you at the time you were buying your hot and cold water dispenser for home will definitely be helpful. Go through it and you might get a long list of possible causes for your water dispenser leakage. Even if it is not mentioned in it, make use of the technology. Search online! You will certainly get some useful information on the possible causes for water leakage from your water dispenser.
Problem With the Water Valve
Among the various parts of your water dispenser, one is the water valve. It is a component that allows the water to enter the machine so that it can be treated. This part of the machine can be either directly connected to the water source with a tube or the platform where the jug is placed. How the water valve is connected entirely depends upon the type of model you have. It does not matter much which way the water valve is connected because when these parts begin to malfunction, the incoming stream of water is blocked and thus, the water is forced out of the connector in the form of leakage. If this is the problem with your water dispenser, it is as easy to fix it as replacing the broken part or tightening it.
What if the Air is Trapped?
Before buying a product we generally go through the customer reviews similarly, for example, when going through the instant hot water dispenser reviews before buying it you come across people saying that their water dispenser got air trapped in it and then the machine began to leak. Do not get scared, it is something natural to happen, just the way air gets trapped in our water pipe lines and we get to hear weird sounds from the tap. It can be definitely fixed, let us see how.
When excess air gets trapped in some internal components of your top-rated water dispenser, what you can do is to continuously run the machine so that any extra air gets flushed out. You might have to drain it to a level of several gallons of water but the technique would definitely work. Now, why does the air get trapped? After some time it is natural for the air bubbles to get building up in various parts of your water dispenser such as the waterlines, spigots, and filters. These air bubbles are the reasons why the overall pressure in the system gets increased and if there are any potential openings in the system, the water is forced out from there thus, causing the machine to leak.
Yes! The Catch Pan Could be Overflowing
A catch pan is that component of a water dispenser which catches any excess water dripping from the spigot after it has been used. After several rounds of taking out the water, it can collect the catch pan and begin to overflow. This might lead you to assume that there is any internal leakage but what is actually required to be done is to empty the catch pan. If you feel you can do it yourself, fine but if you feel the need to call a professional, it is better to call right away.
The Basics of Troubleshooting Water Dispenser
Having tried everything and still being unable to find the root cause of the problem, you can go for the basic troubleshooting procedures so as to fix your water dispenser. There are a few basic steps that you can take to get your machine back at work.
If in any case, you just got your kitchen water dispenser installed, and it is not functioning properly or is dripping right after the installation, the reason for it could be that the machine has not settled into a running cycle yet. So, to get the machine on track it is better to leave it to cool down for at least 24 hours. If the water dispenser is still leaking, try dispensing out quickly about two to three gallons of water so that any air which is probably trapped can be let out. If the leaking persists, try removing the water filter and dispensing more water. This step shall ensure that there is no excess air trapped in the filter housing of your hot and cold water dispenser. If even after this you see the dispenser leaking, you might consider calling a professional or the installation company.
What Else can be Done Apart from Things Mentioned Above?
After several attempts of fixing your leaking kitchen water dispenser, you might begin to feel low and think there’s nothing more that you can do. At the point where this thought comes to your mind, tell yourself that you are wrong and there are still a lot of things left that you may try. Let us see what else you can do or try to fix the problem:
- Attaching the water bottle again – If the top-rated water dispenser that you are using draws its water from a large attached water bottle, it will be beneficial for you to check its connecting point because the problem could be with the jug not been attached properly. You can fix this by taking the jug off its perch, checking the connectors for damage, and reattaching it by tightening the connectors into place.
- Tightening the loose valves – Parts like spigots and valves can loosen with time passing by. This allows extra water to escape through them because the water flows through these parts. Thus, you can end up using more water and paying more electricity bills than you intended to. How can this be fixed? You can try tightening these parts and ensuring that they provide a proper seal when you are not using the water dispenser.
- Try checking for possible clogs and blockages – It was told to you above that building of air bubbles can result in increased internal pressure. Similarly, if there are blockages or clogs in the waterline, they can also build up the pressure but these kinds of pressures are relatively harder to deal with. You might need a professional to fix this problem but you can at least diagnose it by looking at the rate at which the water comes out from the spigot. If the rate is slow as compared to when you got this top-rated water dispenser installed, surely there is an internal blockage that needs to be taken care of.
